XT180 X2 Dry Cell Complete Kit

The XT180-X2 Dry Cell Kit is designed to be used on any petrol or diesel engines between 5.0 and 8.0 litres in size.

When used on 5.0 litre or less vehicles there should be a significant gain in fuel savings, reaching up to 40-45%.

WE RECOMMEND THIS UNIT FOR THE FOLLOWING VEHICLES:
6 CYL, 8 CYL, & 10 CYL PETROL AND DIESEL ENGINES BETWEEN 5 LITRES & 8 LITRES

• 1 - 8 PLATE, 3 CELL GENERATOR DESIGNED WITH 4 HIGH SURFACE COATED TITANIUM PLATES, AND 4 CUSTOM TITANIUM COOLING PLATES
• 1 - 1.5QT Polyethylene Tank with 2 1/4" Unvented Cap
• 1 - 2" Amp Gauge
• 1 - 2" Chrome Amp Gauge Face Plate
• 1 - Gas Dryer
• 1 - 15 cc of our Anti-Foam Solution
• 1 - 500g Sodium Sulfate
• 1 - 8' Lengths of 3/8" ID Braided Reinforced PVC Hose
• 1 - 10' Length of 1/4" ID Braided Reinforced PVC Hose
• 1- Lighted 12V Automotive Toggle Switch
• 1 - 12V 40Amp Automotive Relay
• 1 - 10 Gauge Red Wire - 20' Premium Electrical Automotive Wire
• 1- 10 Gauge Black Wire - 5' Premium Electrical Automotive Wire
• 1- 16 Gauge Red Wire - 10' Premium Electrical Automotive Wire
• 1- 16 Gauge Black Wire - 3' Premium Electrical Automotive Wire
• 8 - Ring Terminals
• 8 - Female Blade Terminals
• 10 - Black Zip Ties
• 16 - Stainless Steel Hose Clamps
• 1 - 1/4" Check Valve
• 1 - 1/4" 90 degree Barbed Nylon Fitting
• 1 - Set of Instructions for Complete Installation

Hardware included for installation:

• Stainless Steel 1/4" Flat Washers,
• Stainless Steel 1/4" Nuts,
• Stainless Steel 10/32" Nuts, and
• Lock Washers,

Volo Mileage Chip FS2

Fitting the Mileage Chip will give you even more economy, well worth the additional cost.